High-Strength Eccentric Sleeve for Rolling Mill

Product Description

Product Description

In the operation of the reducer, the eccentric sleeve is a very important component. Eccentric sleeve is a sleeve adjustment component on the reduction shaft of a reducer, which plays a very important role.

1. Adjusting clearance: There is usually a certain gap between the internal components of the reducer. If the gap is too large, it will cause unstable operation and cause malfunctions. The eccentric sleeve can reduce or increase these clearances by adjusting the position of the axis, in order to make the reducer run more smoothly.

2. Prevent vibration: The gearbox often generates vibration during operation. If the vibration is too large, it will have a significant impact on the subsequent use of the gearbox. The adjustment of the eccentric sleeve can make the gap between the axis and the bearing have an appropriate value, thereby reducing the vibration amplitude of the reducer.

3. Enhance durability: The operation of the gearbox will continue to operate for a long time, but due to prolonged operation, wear and tear may occur between various components, and over time, it may even malfunction. The adjustment of the eccentric sleeve can ensure the correct installation of various components inside the reducer, thereby greatly increasing their durability.

4. Optimize the performance of the gearbox: The gearbox can be optimized by adjusting the sleeve of the eccentric sleeve. By adjusting the position of the sleeve, the output speed and rotational force of the reducer can be changed, thereby better meeting different work requirements.

Eccentric sleeve is one of the key components of the reducer. It adjusts the position of the axis to ensure that the clearance between the various components of the reducer meets the requirements, thereby ensuring the stability, durability, and performance of the reducer. Therefore, in the production and operation of reducers, the role of eccentric sleeves is very important.
 

Product Parameters

Parameter	Value
Application	Rolling Mill Reducer
Size	Customized
Type	Sleeve
Adjustable Angle	1.0 - 2.5
Outside Diameter	50MM - 580MM
Inside Diameter	30MM - 400MM
Length	30MM - 260MM

Detailed Photos