Intermediate Frequency Steel Shell Smelting Furnace

Product Description

Intermediate Frequency Steel Shell Smelting Furnace

Instructions

 

1. Before the industrial electric furnace is opened, it is necessary to check whether the electrical equipment, the water cooling system, the sensor copper tube, etc. are in good condition, otherwise, it is forbidden to open the furnace.

2. If the furnace melt loss exceeds the regulations, it should be repaired in time. It is strictly forbidden to smelt in the deep melt.

3. Personnel should be responsible for power transmission and furnace opening. It is strictly forbidden to touch sensors and cables after power transmission. The shifter is not allowed to leave the post without permission, pay attention to the sensor and the external situation.

4. When loading, check whether there are any inflammable, explosive and other harmful materials in the charge. If it should be removed in time, it is forbidden to directly add cold and wet materials to the molten steel. After the molten liquid is filled to the upper part, it is strictly forbidden to add large blocks. To prevent the cover.

5. It is strictly forbidden to mix iron filings and iron oxides when making furnaces and simmering sputum.

6. The pouring site and the pit in front of the furnace should be free of obstacles and no water to prevent the iron (steel) water from falling.

7. Iron (steel) water is not allowed to be overfilled. When the hand is raised and poured, the two should cooperate. The walking should be stable. Do not rush to stop. After pouring, the remaining materials should be poured into the designated place. .

8. The medium frequency generator room should be kept clean. It is forbidden to bring inflammable and explosive materials and other sundries into the room. No smoking indoors.
 

Features

The Main Features of the Intermediate Frequency Coreless Induction Melting Furnace

 

1. Installation and operation are very convenient.

2. Ultra-small size, lightweight, movable, occupying less than 1 square meter.

3. 24 hours of continuous smelting capacity.

4. Energy-saving.

5. It is convenient to replace the furnace body with different weights, different materials, and different furnace modes to meet various melting requirements.

6. Heating and heat transfer is good, the temperature is even.

7. The medium-frequency magnetic field has a magnetic stirring effect on the molten metal, which is beneficial to the uniform composition and scum.

8. According to the equipment and the amount of smelting, the melting time of each furnace is 20-30 minutes.

Parameters

Specifications and Main Parameters of Intermediate Frequency Coreless Induction Melting Furnace:

 

Furnace Model	GWL-0.15	GWL-0.20	GWL-0.25	GWL-0.30	GWL-0.50	GWL-0.80	GWL-1.0	GWL-2.0	GWL-3
Actual Molten Steel (kg)	150-250	200-350	250-400	300-450	500-750	800-950	1000-1300	2000-2800	3000-3800

Technical Parameter:

 

Furnace Model	GWT1.0	GWT-2.0	GWT-3.0	GWT-5.0	GWT-10.0	GWT-12.0
Actual Molten Steel (kg)	1000-1300	2000-2800	3000-3800	5000-5500	10000-11500	12000-13500
Melting Time Per Furnace (minutes)	55-75	60-70	60-75	70-95	75-95	80-100