Medium Frequency Heating Furnace for Steel Pipe Coating

Product Description

Introduction

This product is used for induction heating of round, square and rectangular tubes before coating. The equipment consists of intermediate frequency power supply, capacitor bank, heating sensor, control console, furnace lifting mechanism, temperature closed-loop control system, water cooling system, etc.
 

Parameters

Parameters	Values
Usage environment	-35°C-45°C. When the temperature is lower than 0°C, if the equipment is out of use, it should be Drain the water in the equipment to avoid freezing and cracking the equipment's pipes
Relative humidity	≤95%
Primary voltage measurement of rectifier transformer	6.3KV
cooling water pressure	0.1-0.5Mpa
Cooling water temperature	≤40°C
Cooling water quality	Circulating cooling water SS≤40mg/L, hardness≤10
Steel pipe specifications	φ21, φ27, φ33.4, φ42.2, φ48.3, φ60.3,φ88.9, φ101.6, φ114.3,φ219
Heating running speed	5m-20m/min
Steel pipe wall thickness	2.11-12.7mm
Heating temperature	150°C

Heating speed of steel pipes of various specifications
 

Pipe diameter(mm)	thickness(mm)	heat speed(m/min)	power	remark
Φ21-33.4	3.73	20	190	According to the maximum pipe diameter and maximum wall thickness, the unit weight is 3kg/m
Φ42.2-60.3	5.54	20	510	According to the maximum pipe diameter and maximum wall thickness, the unit weight is 8kg/m
Φ88.9-101.6	8.08	9	580	According to the maximum pipe diameter and maximum wall thickness, the unit weight is 20kg/m
Φ114.3-141.3	9.52	5.5	580	According to the maximum pipe diameter and maximum wall thickness, the unit weight is 33kg/m
Φ168.3-219	12.7	2.7	600	According to the maximum pipe diameter and maximum wall thickness, the unit weight is 68kg/m

 

 

Detailed Photos

 

 

 

Please send us more information about your project as following, in order to let us recommend you the right furnace for your project:
--- The metal type you want to heat.
--- The dimension of the metal you want to heat.
--- Heating rate or speed if you request.
--- Available power (KW or MW) limit for furnace.
--- Primary Voltage (KV), Industrial Voltage (V), and Working frequency (Hz) in your project site.
--- Project Location: Country and City.

We would like to give you our proposal immediately after getting your details.
Sincerely welcome you to come and visit our